Product introduction:
It is made of polyimide film which is coated with high temperature silica gel.
Product feature:
It has excellent electrical performance, high insulation (less than 8.5KV). Resistance to high and low temperature, resistance to acid alkali and low electrolysis.
Good mechanical properties, low friction coefficient, tear resistance, and with strong adhesion.
After being torn off, the surface is covered with no residual glue.
Product structure:
Product application:
It applies to motor insulation, solder mask of PCB, gold plated finger on printed circuit board,
hot air tin hole machining, shield protection in each stage of tin stove and insulation package for heating sheet.
Ø1、To achieve the best effect of bonding, bonding surfaces must be clean and dry, when adhesive tape bonding surfaces, please refer to the average pressure above - 2.0kg/cm with roller pressing and continue 3-5 seconds, after effective adhesion, the best bonding effect can be achieved when the storage time is more than 24 hours.
Ø2、Ideal tape applications temperature ranges from 70 °Fto 100 °F(21 °C to 38 °C). It is not recommended that the initial adhesive tape is applied on the surface at temperature below 50 F (10 °C) because the surface of the adhesive is very hard.However, once applied correctly, the low temperature remains satisfactory.
Ø 3、Optimum storage conditions and environment：temperature 15-28°C,humidity 40%-70%.Shelf life is generally six months.